1060 aluminum plate is widely used in products with low strength requirements. Products are often used in signs, billboards, building exterior decoration, bus body, tall buildings and factory wall body adornment, kitchen sink, lamp holder, fan blade, electronic parts, chemical equipment, mechanical parts, deep drawing of sheet or spinning concave ware, welding part, heat exchanger, clock surface and plate, plate, kitchenware, ornaments, reflective equipment, etc.
Product Detail:
| Thickness | 0.1-400mm，etc | Length: | 100-12000mm，or as required |
| Width | 20-3000mm，etc | Standard: | ASTM，AISI，JIS，GB， DIN，EN |
| Certification: | ISO, SGS，BV |
|
|
| Surface finish | mill,bright,polished,hair line,brush,sand Blast,checkered,embossed,etching,etc |
|
|
| Grade | 1000 Series: 1050 1060 1070 1100 1200 1235 etc. |
|
|
| 3000 Series: 3003 3004 3005 3104 3105 3A21 etc. |
|
|
| 5000 Series: 5005 5052 5083 5086 5154 5182 5251 5754 etc. |
|
|
| 6000 Series: 6061 6063 6082 6A02 etc. |
|
|
| 7000 Series: 7050 7475 7075 etc. |
|
|
| Temper | H12,H14,H16,H18,H20,H22,H24,H26,H28,H32,H36,H38,HO,H111,H112,H114,H116,H118,H321. |
|
|
| Packing | standard export packing (inside:water proof paper,outside:steel covered with strips and pallets) |
|
|
| Container size | 20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High) |
|
|
| 40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High) |
|
|
| 40ft HC:12032mm(Length)x2352mm(Width)x2698mm(High) |
|
|
■ Roll casting
Aluminium ingot into quiet place furnace and vertical plate with casting machine, the thickness is 7.7 to 5.5 thick thick burrs, the 1060-1260-1360-1460-1560 and then transferred to the cold machine,, cold machine cutting quantity at least 3 cm，Casting of blank are generally burrs out, to the round edge, and then to the cold.
■ Cold rolling
Tied to the thickness we need, to 14 and 24, if it's 24, annealing directly.
■ Annealing
Annealing time probably in 12 hours.
■ Forced air cooling
The winter air about 12 hours, air-cooled 18 to 20 hours of summer can only be air cooled through finished product.
■ Packaging
Customize the packaging according to customer's requirements.
